ID-SUBSEA — Innovation & Development of Subsea Technology Request a quote
ID-SUBSEA team
Headquarters at the São José dos Campos Technology Park
Technology ParkSão José dos Campos, Brazil
Brazilian subsea equipment manufacturer

About us

Founded in 2018 to serve the subsea equipment and underwater robotics market, ID-SUBSEA delivers 100% Brazilian-developed solutions. That means easier access to innovation, less bureaucracy and cost-effective solutions for companies operating in Brazil.

Our team brings together engineers, technicians and software developers with extensive Oil & Gas experience, particularly in subsea electronics, ROV systems and underwater robotics.

Sectors we serve
  • Oil & gas
  • Hydropower
  • Aquaculture
  • Defense
  • Research
ROV and subsea equipment

Product line

Cameras, lighting and video recording for subsea inspection. Open each product's specifications or download the full datasheet.

Subsea LED Light ID-LM-120
ID-LM-120

Subsea LED Light

Compact, rugged ROV light delivering 10,000 lumens with precise intensity control.

  • Up to 3,000 m
  • 10,000 lm
  • 100–130 VAC
Technical specifications
Electrical
Power supply120 VAC (100–130 VAC) / 0.76 A
Nominal power90 W
Luminous flux10,000 lm
Color temperature6,500 K
Beam angle84.8°
Intensity controlTRIAC and VARIAC
Mechanical
Dimensionsø 87 × 163.8 mm
Weight1.66 kg in air; 0.66 kg in water
LensAcrylic
HousingAnodized 6061 aluminum
Environment
Operating depth3,000 m
Operating temperature−10 °C to 50 °C
Connector5507-1503-0001, 3-way threaded
Datasheet (PDF, PT)Quote
Subsea LED Mini Camera ID-MCL-0001
ID-MCL-0001

Subsea LED Mini Camera

Visual inspection in low or no light, with built-in LED and protection against surges and reverse polarity.

  • Up to 3,000 m
  • Dimmable LED
  • 1,500 lines
Technical specifications
Electrical
Power supply24 VDC (20–26 VDC) / 0.12 A
Video outputCVBS 1.0 Vp-p (75 Ω)
Video standardNTSC
Signal-to-noise ratio> 38 dB
ProtectionOvervoltage, overcurrent, video line surges and reverse polarity
Optics
Sensor1/2.7″ CCD
Minimum illumination0.00001 lx (F 3.8 mm)
Resolution1,500 lines
Horizontal field of view83°
LED6 lm (array), dimmable
Mechanical
Dimensionsø 45 × 144.5 mm
Weight0.850 kg in air; 0.614 kg in water
LensAcrylic
Housing316L stainless steel
Environment
Operating depth3,000 m
Operating temperature−10 °C to 60 °C
Connector5506-1508-0001, 8-way threaded
Datasheet (PDF, PT)Quote
Color Zoom Camera ID-CFZ-001
ID-CFZ-001

Color Zoom Camera

Color camera for subsea inspection, with focus and zoom control and a sapphire window.

  • Up to 4,000 m
  • 36× optical zoom
  • CVBS
Technical specifications
Electrical
Power supply20–26 VDC / 0.32 A
Video outputCVBS 1.0 Vp-p (75 Ω)
Video standardNTSC
Signal-to-noise ratio> 50 dB
Zoom and focus control+12 VDC
Optics
Sensor1/4″ EXview HAD CCD
Minimum illumination1.4 lx (F 1.6; 50 IRE)
Resolution550 lines
Zoom36× (F 1.6 to F 4.5)
Horizontal field of view57.8° to 1.7°
Mechanical
Dimensionsø 100 × 281.2 mm
Weight3.45 kg in air
WindowSapphire
HousingAnodized 7020-T6 aluminum
Environment
Operating depth4,000 m
Operating temperature−10 °C to 60 °C
Connector5506-1508-0001, 8-way threaded
Datasheet (PDF, PT)Quote
HD Color Zoom Camera ID-HD-0001
ID-HD-0001

HD Color Zoom Camera

Full HD video over 3G-SDI for subsea inspection, with optical zoom, focus and an RS-232 interface.

  • Up to 4,000 m
  • Full HD 3G-SDI
  • 30× optical zoom
Technical specifications
Electrical
Power supply20–26 VDC / 0.35 A
Video output3G-SDI 800 mV p-p (75 Ω)
Video standardSMPTE ST 424M
Signal-to-noise ratio> 50 dB
Zoom and focus control+12 VDC
Serial interfaceRS-232
ProtectionReverse polarity, overcurrent and surges
Optics
Sensor1/2.8″ Exmor R CMOS
Minimum illumination0.1 lx (F 1.6; 50 IRE)
Resolution1920 × 1080p, 30 fps
Zoom30× (F 1.6 to F 4.7)
Horizontal field of view63.7° to 2.3°
Mechanical
Dimensionsø 100 × 281.2 mm
Weight3.45 kg in air
WindowSapphire
HousingAnodized 7020-T6 aluminum
Environment
Operating depth4,000 m
Operating temperature−10 °C to 60 °C
ConnectorSaiv 04-03 Coax BCR, 4-way threaded
Datasheet (PDF, PT)Quote
SIT Low-Light Camera ID-SIT-001
ID-SIT-001

SIT Low-Light Camera

For inspections in very low light, with a 104° wide-angle lens.

  • Up to 4,000 m
  • 0.000007 lx
  • 104° wide angle
Technical specifications
Electrical
Power supply20–26 VDC / 0.25 A
Video outputCVBS 1.0 Vp-p (75 Ω)
Video standardNTSC
Signal-to-noise ratio> 45 dB
Optics
Sensor1/2.8″ BSI CMOS
Minimum illumination0.000007 lx (F 1.4 mm)
Resolution570 lines
Horizontal field of view104° (wide)
Mechanical
Dimensionsø 100 × 281.2 mm
Weight3.4 kg in air
WindowSapphire
HousingAnodized 7020-T6 aluminum
Environment
Operating depth4,000 m
Operating temperature−10 °C to 60 °C
Connector5506-1508-0001, 8-way threaded
Datasheet (PDF, PT)Quote
ID-VOR Overlay + DVR ID-VOR
ID-VOR

ID-VOR Overlay + DVR

Data overlay and video recording for the ROV control room, in a 19″ rack enclosure.

  • 8-channel recording
  • HD-SDI and analog
  • 4U rack
Technical specifications
Video
Inputs4 analog + 4 HD-SDI digital
Outputs8 outputs, 1920 × 1080
RecordingUp to 8 simultaneous channels at 720p, 1080p and 4K
CompressionH.264 and H.265
Features
OverlayText, vectors and images, with adjustable color, size and position
DataSerial, TCP/IP and UDP
OperationChannel snapshots, dive logs, save and load configurations
System
StorageUp to 30 TB, as required, + optional NAS
EnclosureStandard 19″ rack, 4U high
LicenseDigital, with protection key
Request datasheetQuote

Products in stock

We keep expanding our inventory so the equipment our clients rely on is available fast and delivered reliably when operations need it.

Cases of ID-SUBSEA products ready for delivery
Electronic and mechanical design

Engineering

We develop custom products, from schematics and 3D models to tested prototypes and manufacturing documentation.

ID-SUBSEA engineer testing an electronic board

Electronics

From component selection and circuit schematics to PCB layout, assembly, testing and final integration. Owning every stage gives tighter control over quality, reliability, maintainability and long-term support.

  • Full electronic design
  • PCB design and integration
  • Custom firmware
  • Fast prototyping and testing
Mechanical simulation of a subsea housing

Mechanics

From concept and 3D design to manufacturing drawings and equipment integration. Robust, reliable, easy-to-maintain designs built around each client's operation.

  • Mechanical simulation
  • Full product assembly
  • 3D-printed prototypes
  • Manufacturing drawings
Printed circuit boards designed by ID-SUBSEA
3D model of a camera with internal electronics
ID-SUBSEA camera installed on an ROV
Talk to our sales team

Contact

Tell us what you need: maintenance, a product quote or a custom project.

Send us a message

Send via WhatsAppSend via email

Your message opens ready to send in WhatsApp or your email app.